Hardware setup

STEP 6: construct the z-axis module with the profile

The Z-axis module in (1) will be attached to the X-axis holder on the same Aluminum profile and screwed properly from the side shown in (1.1) and the laser head will be attached to the Z-axis module from the side shown in (1.2). The full structure of Z-axis module with the holder and profile is shown in (2). The Aluminum profile holding the X-Z axis motors will be placed at the top between the two Y-axis holders as shown in (3). Finally, the laser head will be attached to the Z-axis module as shown in (4) and the final CNC structure including all of the axes and the laser is shown in (5).