Hardware setup

STEP 3: Attach the y-axis motors to their profiles

To attach the Y-axis motors with the Aluminum profiles, the holder will slide into the profile so that the four wheels can move freely along the profile, then the belt will be inserted in the Aluminum profile (Note: please make sure that the sharp side of the belt is placed down-side) and pass it through the pulley as shown in (1 & 1.1) (Note: please make sure that the pulley is locked properly), so that the Y-axis motor can move in Y-axis direction. The belt is fixed using screws as shown in (2 & 2.1). The same procedure is applied for both Y-axis sides and the final structure is shown in (3).